Custom Design From 141 Models
Start from 141 card socket models across 13 series instead of a blank page. Our R&D team joins your project with CAD models, footprint review and DFM feedback.
Card Connector Services for OEM Clients
Home / Customizing for OEM
What You Get From MOARCONN Service
In-House Mold & Tooling
Tooling is machined in our own mold shop to ±0.002mm accuracy, so the prototype you approve is the exact geometry we mass-produce — no hand-off to a third-party shop.
7-Day Sampling
Existing models ship as free samples within 7 days. A custom housing or pin layout follows the 25-day development cycle, with a first article included.
25-Day Development Cycle
From drawing approval to first molded sample in 25 days, covering tooling, stamping and molding in our three in-house plants.
0 MOQ & Flexible Replenishment
Orders start at 0 MOQ — a 20-piece prototype run is a normal request — and replenishment terms scale with your volume, so you never pay for a container load you do not need.
Quality System You Can Audit
Production runs under ISO 9001, ISO 14001 and IATF 16949 (T180696 / 0595308). Every socket is validated to 10,000 mating cycles at ≤30mΩ from -45°C to 80°C, with coplanarity at ±0.05mm.
Compliance-Ready Materials
RoHS and REACH aligned declarations, halogen-free housing options, and ISO 16750-3 vibration data available for automotive telematics and transport programs.
24h FAE & 3-Year Retention
Original-factory FAE responds within 24 hours — not a distributor queue. Samples are retained for 3 years, so any field return traces back to its production lot.
Three Problems OEM Clients Bring Us — and How We Solve Them
Dilemma 1
Difficulty in product selection
SIM, Micro SD and SD card sockets come in hundreds of variants across height, pin count and card type. Picking the wrong model risks a redesign late in the project.
Solution
Start from 141 card socket models across 13 series. Our FAE narrows the options from your PCB footprint, mated height and card speed in a single round of questions.
Support
If no standard model fits, we provide customized design support instead of pushing a near-fit part.
Dilemma 2
Difficulty in design integration
Physical dimensions, pin mapping and interface compatibility rarely line up on the first PCB spin, and a mismatch stalls your board bring-up.
Solution
Our R&D team joins your design early with CAD models, footprint review and DFM feedback, so the connector geometry is right before the board is fabricated.
Support
Engineering support covers CAD models, technical documentation and design recommendations for a smooth integration.
Dilemma 3
Supply chain management challenges
Long lead times and price swings on memory and communication card sockets put your production schedule at risk.
Solution
Buy direct from the manufacturer. In-house stamping and injection molding keep supply stable and prices factory-direct, with 7-day sampling and a 25-day development cycle for custom work.
Support
A long-term dealer partnership adds stocking strategy, supply-chain transparency and an emergency spare-parts program.
From Inquiry to Delivery: 9 Steps With Timeframes
Step 1
Contact Us
Reply within 24 hours
Step 2
Requirement Confirmation and Product Recommendation
Footprint, height and environment reviewed
Step 3
Provision of quotes and contract signing
Quote within 48 hours
Step 4
Providing samples
Existing models in 7 days, 0 MOQ
Step 5
Sample confirmation
Dimensional report and force curve included
Step 6
Definition of the production plan
Custom development in 25 days
Step 7
Production and Quality Control
IATF 16949 line, full inspection
Step 8
Product Delivery
Stable lead times at scale
Step 9
After-sales service & support
FAE within 24 hours, 3-year sample retention
What Our Clients Say
David Smith
Jessica Taylor
Frequently Asked Questions
- What is the minimum order quantity for custom card connectors?Zero MOQ — prototype quantities of 20 to 50 pieces are normal requests, and the same order scales to mass production.
- How fast will I receive samples of a card connector?Existing models ship in 7 days; a custom housing or pin layout follows a 25-day development cycle from drawing approval.
- What should I prepare before requesting a custom card connector quote?Five inputs make the quote accurate in one round: footprint, mated height, card type and speed mode, temperature range, and annual volume.
- Can you replace an imported or discontinued card connector?Yes — the brand-replacement program redesigns a pin-compatible socket around your existing footprint, so the PCB needs no respin.
- Which certifications support automotive and medical connector programs?IATF 16949 (T180696 / 0595308), ISO 9001 and ISO 14001 in production, plus ISO 16750-3 vibration data for automotive programs.
- How is long-term contact reliability guaranteed?Phosphor bronze terminals with 0.025µm gold over nickel, 10,000 mating cycles at 30mΩ or less from -45°C to 80°C.
- What after-sales support does MOARCONN provide?Original-factory FAE responds within 24 hours, and samples are retained for 3 years for production-lot traceability.
- Do you sign NDAs and support full ODM projects?Yes. An NDA is signed before drawing exchange, and ODM projects run on the same 25-day development cycle.
Become a MOARCONN Partner
Join MoarConn, we have more than 20 years of experience, providing you with training, design, production support, so that you can quickly become a custom connector expert.
- Provide market analysis
- Flexible order and replenishment policy
- Comprehensive technical training support
- Product compatibility
- Quality reliability and durability
- Fast design to molding in 25 days
Tip: attach your footprint drawing (PDF or DXF) with the inquiry — it removes a full round of quotation questions and typically gets you a quote within 48 hours.
Please send your message to us
- Phone
- *Title
- *Content
Global Partners
Trust from more than 150+ partners around the world
Please send your message to us
- Phone
- *Title
- *Content